Saturday, October 5, 2019
FINANCIAL PLANNING AND WEALTH MANAGEMENT Essay Example | Topics and Well Written Essays - 3000 words
FINANCIAL PLANNING AND WEALTH MANAGEMENT - Essay Example Investing the entire sum of money in a single stock exposes the investor to the risk of that asset. So, in case when the price of that security falls in the market due to any reason, the investor will suffer huge losses. This, risk of concentration of money in a single stock is mitigated through diversification. As per the preliminary interview conducted with a married couple named Kevin and Katia we came to know the following details: Katia aged 43, is a primary school teacher earning ?35,000 per annum and contributes 7.6% of her gross annual salary to the Teachersââ¬â¢ Pension Scheme. Kevin aged 45, is a construction site project manager earning ?80,000 per annum and contributes 6% of his gross annual salary to a defined contribution scheme. The couple has two children ââ¬â Tilly and Jemima aged 7 and 9 years. The couple seeks advice for their retirement planning that is after 17 years when Katia is 60. The couple would like to achieve a combined retirement income of approxi mately ?45,000 in todayââ¬â¢s terms. ... Kevin has identified a range of investments that the couple might consider to help achieve their retirement planning objectives (including index-linked gilts, corporate bond funds, authorised investment funds and offshore equity funds) but is not sure about the option to choose. With an investment of ?10,000 annually a target of 7% is required to achieve their target objectives. Therefore, in this paper we would analyze and evaluate the various parameters to achieve the desired objectives and return. Part 1: Identification of Appropriate Investment Options Portfolio management is the fundamental work of investment management. It can be done by minimizing the risk through diversification. In order to manage an investment portfolio, three steps are considered by portfolio manager i.e. planning to execution to feedback. In the planning step, the objectives and policies of investment are formulated, strategic asset allocations are ascertained and capital market expectations are formed. I n the execution step, a portfolio is constructed by portfolio manager. And, in the feedback step, the portfolio manager examines and assesses the portfolio compared with the plan (Villanova, No Date, p.5). The steps discussed here were in the short form. Taking in account the large form, the portfolio manager have to consider the following steps in order to manage his investment portfolio. The steps are as follows: Specification of investment objectives: In order to manage an investment portfolio, the usual objectives sought by investors are capital appreciation, current income and safety of principals. Choice of asset mix: Asset mix decision is the most
Friday, October 4, 2019
Quality and IT Management Essay Example | Topics and Well Written Essays - 1500 words
Quality and IT Management - Essay Example 2. Role of Quality Gurus Some of the most famous quality gurus include Armand Feigenbaum, Edwards Deming, Philip Crosby, Kaoru Ishikawa, Genichi Taguchi, and Shigeo Shingo (Beckford 2002, p. 54). All of these gurus brought different concepts of quality which not only helped the companies achieve competitive advantage in the past but also provide appropriate directions towards success to the companies belonging to the present world. We can take example of Masaaki Imai who came up with the concept of Kaizen in 1986, which led Japanââ¬â¢s way to huge success in the field of technological development. Kaizen is an umbrella, which includes all Japanese practices related to quality management. Imai focused on continuous improvement in all departments of a company. Shigeo Shingo was a Japanese quality guru who focused on zero quality control and brought the concept of Poka-Yoke which means to identify the errors before they become some real defects. Kaoru Ishikawa was another Japanese qu ality guru who also believed in some other concepts other than just provision of quality products to the customers. He focused on after sales service, company and the customers, and quality of the management. One of the main teachings of all quality gurus was quality control, which means to ensure quality in all stages of a product development. In the engineering domain, quality control results in accepting or rejecting a manufactured product (Unhelkar 2003, p. 303). In the view of quality gurus, the process of quality control includes certain actions which are necessary for the control and verification of required characteristics of any product or services provided by a company. Fryman (2002, p. 6) found that the main purpose of quality control is to eliminate all factors which can result in unsatisfactory product performance. Along with quality control, some American quality gurus, such as, Dr. Joseph Juran and Dr. W. Edwards Deming also focused on quality management that leads a companyââ¬â¢s way towards success. The primary objective of quality management is to increase customer satisfaction with the companyââ¬â¢s products and services. Demingââ¬â¢s quality cycle comprised of some key steps, which included Plan, Do, Study, and Act. Deming focused on bringing improvements in quality of products and services by reducing the elements of variability and uncertainty in design and features of the products and services. On the other hand, Juran believed in the philosophy of ââ¬Ëfitness for useââ¬â¢ and advocated the use of ââ¬Ëquality cost measurementââ¬â¢. Philip Crosby was a Western American quality guru who believed in the concept of ââ¬Ëconformance to requirementsââ¬â¢. Crosby came up with four main concepts related to quality management. The first one was that quality is not goodness or elegance rather it is conformance to the requirements of the customers. The second concept was that the system for creating quality has nothing to do with appraisal rather it is concerned with prevention. Third concept was the zero defects standard of quality whereas the fourth concept was that measurement of quality should be the price of nonconformance. Crosby focused on reducing the manufacturing expenses by doping things right at the first time instead of correcting them. In the past, the teachings of quality gurus really helped companies become more competitive in nature, lower the product manufacturing costs, improve
Thursday, October 3, 2019
Statistical Analysis Paper Essay Example for Free
Statistical Analysis Paper Essay The article was a cross- sectional, non- experimental case study of social workerââ¬â¢s perceptions of bullies at the workplace and the social workerââ¬â¢s ability to create coping responses to workplace bullying. To collect quantitative information a mail questionnaire was gathered, and individualsââ¬â¢ semi-structured interviews were assessed. The qualitative sample included 111 male and female social workerââ¬â¢s from Washington D.C. the final outcome result were three to five social workerââ¬â¢s reported that he or she were recipients of rude, unpleasant, and unfavorable workplace environmental interactions within a year. The bulliesââ¬â¢ targets generally worked in military and mental health outpatient organizations or government agencies. About 35% of the targets held a discreet service role, and 29% held a management or administration role. The results outcome from the study provided evidence that in the social working profession the agencies and organizations need guidelines or tools to help discover, confront, and stop bullying behaviors in the workplace ( Whitaker, T., 2012). See more: how to write an analysis of a research paper Statistical Analysis in the Article The article incorporates tables, descriptive statistics that helps with the understanding of the data, it also provides five tables of illustrations. Table one is about the demographic characteristics of the targets of the workplace bullies, it displays the characteristics of social workers ranging by age, gender, and demographics (Whitaker, T., 2012). Table two is about organizational settings and roles of target, it displayed supervisors, colleagues, subordinates, and clients were all identified as bullies. It showed that women were more than twice as likely (65%) to be identified as bullies as were men 33% (Whitaker, T., 2012). Table three is about the most troubling bullying behaviors, showing that verbally, and covertly hostileà actions were the most troubling bullying behaviors in the workplace. In addition, being treated with disrespect and having work de-valued as the hardest aspects of being bullied at the workplace. Table four was the summary characteristics of bullies, the study showed characteristics were either passive or assertive by the coping scale. The passive behavior ranging score of 24 and assertive score of 60. The median and mean scores were 42.5, and a multiple modal score. The last table, which was five was the classification of Reponses to the coping scale as passive or assertive coded in the same direction the table explained coping strategies and responses (Whitaker, T., 2012). Descriptive Statistics and Inferential Statistics In the article several questions were asked in a questionnaire. The more passive the response, the lower the value assigned to it, the more assertive the response, the higher the value was assigned to it. The targets had a range of coping strategies, the biggest response strategy was talking about the bullying with someone he or she trusted, 93% used this strategy more than once, 66% used the strategy of confronting the person more than once. However, only 17% used formal complaint (Whitaker, T., 2012). The data supported the research problem of workplace bullying. It was noteworthy and explained that three out of five social workers were recipients of rude, unpleasant, and unfavorable workplace environmental interactions. However, the article did not provide inferential statistics. The data was collected through questionnaire and based on actual results to determine the statistics (Whitaker, T., 2012). Conclusion In conclusion, this article explored the issues of workplace bullying of social workers and the coping responses, it included a number of concerned issues for the social working profession. Among these issues included the characteristics of workplace bullies, and coping Reponses. The article suggests that workplace bullying is a serious issue for social workers and needs to create guidelines and tools to help stop bullying behaviors (Whitaker, T., 2012). References Whitaker, T. (2012). Social workers and workplace bullying: Perceptions, responses and implications. Work, 42(1), 115-123.
Cloud Point Extraction Experiment
Cloud Point Extraction Experiment Bromothymol blue (also known as bromothymol sulfone phthalein, BTB) (Figure 2.1.1) is a pH indicator (yellow at pH 6.0 and blue at pH 7.6). Its chemical name is: 4,40-(1,1-dioxido-3H-2,1-benzoxathiole-3,3-diyl)bis(2-bromo-6-isopropyl-3-methylphenol (The Merck Index, 13th edition, 2007)[1]. pKa of BTB is 7.1. This dye is the most appropriate pH indicator dye in physiological tissue and also used in the investigation of the interaction of lipid with protein (Puschett and Rao 1991; Gorbenko 1998; Sotomayor et al. 1998)[2,3,4]. It is widely applied in biomedical, biological, and chemical engineering applications (Schegg and Baldini 1986; Ibarra and Olivares-Perez 2002)[5,6]. BTB in protonated or deprotonated form is yellow or blue in color, respectively, while its solution is bluish green in neutral solution. It is sometimes used to define cell walls or nuclei under the microscope. BTB is mostly used for the evaluation and estimation of the pH of pools and fish tanks and the determinatio n of the presence of carbonic acid in liquid. There are several treatment procedures for dyes from waste materials, including adsorption (Nandi, Goswami, and Purkait 2009)[8], coagulationââ¬âflocculation, oxidationââ¬âozonation, reverse osmosis, membrane filtration, biological degradation, and electrochemical processes (Shen et al. 2001; Kim et al. 2004; Chatterjee, Lee, and Woo 2010)[9,10,11]. 2.1.2 EXPERIMENTAL 2.1.2.1 Materials: All the solutions were prepared with double-distilled water. 2.1.2.1.1 Triton X ââ¬â 100 (0.1M): Triton X-100 was purchased from Qualigens Analytical grade. The TX-100 was cleared of any low-boiling impurities by exposure to vaccum for 3h at 700C following the procedure given by Kumar and Balasubrahmanium[19]. 31.4 g of TX-100 liquid is dissolved 500 ml volumetric flask and made up to the mark to obtain 0.1 mol/dm3 solution. The critical micellar concentration and Cloud point of TX-100 are 2.8Ãâ"10âËâ4 [20] 65à ¢-à ¦C [21] respectively. 2.1.2.1.2 Bromothymol Blue (BTB) : 1.0 g of BTB dye Merck India was dissolved in 5.0 ml of ethanol (99.8%) for dissolution then dilution are made with double distilled water into a 1000 ml volumetric flask up to the mark to obtain an concentration of 1000 mg/dm3(Babak Samiey, Kamal Alizadeh et.al 2004)[22]. In order to avoid fading stock solution was wrapped black color paper. The working solutions of BTB were prepared by appropriate dilutions of the stock solution immediately prior to their use. 2.1.2.1.3 Acetic acid (0.5M). 28.5 ml glacial acetic acid (A.R.grade) Qualigens was diluted with distilled water in a 1000 ml volumetric flask to give 0.5M Acetic acid solution. The solution obtained was diluted to required concentration and standardized as per the procedure (Vogel et. al. 1989)[23] with standard NaOH solution. 2.1.2.1.4 Sodium acetate (0.5M): 13.6 g sodiumacetate.trihydrate, (CH3COONa.3H2O) of Analytical grade Qualigens is dissolved in 100 ml volumetric flask and made up to the mark (Vogel et. al. 1978)[24]. 2.1.2.1.5 NaCl (0.1M): 2.922 g pure dry salt of sodiumchloride of analytical grade Qualigens is weighing out and dissolved in 500 ml volumetric flask to give 0.1M NaCl solution(Vogel et. al. 1989)[25]. 2.1.2.1.6 Na2SO4 (0.5M): 16.1 g of sodiumsulphate decahydrate,(Na2SO4.10H2O) A.R.grade from Merck (India), is dissolved in 100 ml volumetric flask and made up to the mark to give 0.5M Na2SO4 solution(Vogel et. al. 1989)[26]. 2.1.2.1.7 KH2PO4(1.0M): 34.02 g of KH2PO4 of Analytical grade Qualigens is dissolved in 250 ml volumetric flask and made up to the mark (Vogel et. al. 1978)[27]. 2.1.2.1.8 Na2HPO4 (1.0M): A.R. grade disodium hydrogen phosphate, Na2HPO4.2H2O, is taken in porcelain crucible and heated until no more water is liberated. Then 17.8 g of this cold residue is taken in 100 ml volumetric flask and made up to the make to give 1.0 M of Na2HPO4 solution (Vogel et. al. 1978)[28]. The reagent is prepared freshly each time. 2.1.2.1.9 Buffer solution of pH4.0(à ±0.05): 5 ml of 4M sodium acetate (A.R. grade) Qualigens and 20 ml of 4M acetic acid (A.R. grade) Qualigens are mixed in an 100ml volumetric flask and made up to the mark which has resultant pH of 4.0(à ±0.05) (Vogel et. al. 1989)[29] . 2.1.2.1.10 Buffer solution of pH5.0(à ±0.05):: 17.5 ml of 4M sodium acetate (A.R. grade) Qualigens and 10 ml of 4M acetic acid (A.R. grade) Qualigens are mixed in an 100ml volumetric flask and made up to the mark which has resultant pH of 5.0(à ±0.05) (Vogel et. al. 1989)[30] . 2.1.2.1.11 Buffer solution of pH6.0(à ±0.05): 13.2 ml of1M KH2PO4 (A.R.grade) Qualigens and 86.8 ml of 1M Na2HPO4 (A.R.grade) Qualigens are mixed in 100ml volumetric flask which has resultant pH of 6.0(à ±0.05) (Vogel et. al. 1989)[31]. 2.1.2.1.12 Buffer solution of pH7.0(à ±0.05): 61.5 ml of 1M KH2PO4 (A.R.grade) Qualigens and 38.5 ml of 1M Na2HPO4 (A.R.grade) Qualigens are mixed in 100ml volumetric flask which has resultant pH of 7.0(à ±0.05) (Vogel et. al. 1989)[31]. 2.1.2.1.13 Buffer solution of pH8.0(à ±0.05): 94.0 ml of 1M KH2PO4 (A.R.grade) Qualigens and 6.0 ml of 1M Na2HPO4 (A.R.grade) Qualigens are mixed in 100ml volumetric flask which has resultant pH of 8.0(à ±0.05) (Vogel et. al. 1989)[31]. 2.1.2.1.14 Buffer solution of pH9.2(à ±0.05): 1.905g of Na2B4O7.10.H2O of (A.R.grade) Qualigens is dissolved in 100ml volumetric flask and made up to the mark to obtain 0.05 M of borax solution.The resultant pH of the solution is 9.2(à ±0.05) (Vogel et. al. 1989)[32]. 2.1.2.2 Methodology for cloud point extraction: 2.1.2.2.1 Procedure: The cloud point temperature was determined by literature method reported by Carvalho et al. [33]. This is based on the ââ¬Ëvisual observation of the separation of phasesââ¬â¢ in the micellar solution. The solution was heated gradually in the water bath until turbidity appeared. To verify the results, the opposite process was carried out by cooling gradually with constant stirring and the cloud point was considered as the temperature at which the solution became clear. The reported value was the average of these two determinations; in most cases, these two temperatures were identical, within + 0.5oC. Cloud point extraction experiment was conducted by using a 10 ml centrifuge tube with a screw cap containing different concentrations of Triton X-100 and BTB and sonicated for 2 minutes for proper mixing. The solution is heated up to 80Ãâ¹Ã
¡C in a thermostatic temperature bath for 20 min. The turbid solution was then centrifuged at 3500 rpm for 5 min and cooled in an ice bath for 2 minutes in order to separate the phases. Both the phases are separated and the volumes of surfactant rich phase (coacervate phase) and dilute phases were measured. Average of three determinations is reported in all cases. The concentration of dye in both the phases has been measured by using PerkinElmer lamda-25 UV-Visible spectrophotometer. In order to determine the influence of the reagents added to the surfactant phase, cloud point determinations were performed with the additions of buffer, dye and inorganic salts. The procedure for the determination of critical temperature was the same as above, bu t using only a fixed surfactant concentration. The phase diagram for Triton X-100 was obtained by measuring the cloud point temperature of aqueous surfactant solutions at different concentrations. 2.1.2.2.2 Spectra and calibrated graph The concentration of the dye was determined by U.V-visible spectrophotometer (PerkinElmer lamda-25). Pure BTB was initially calibrated separately for different concentrations in terms of absorbance units, which were recorded at wavelength 430 nm, at which maximum absorption takes place (Figure 2.1.2, 2.1.3). No significant change in the absorbance has been observed even in the presence of TX-100. Therefore all the absorbance measurements were performed at this wave length. Figure 2.1.2 Spectra of BTB dye Figure 2.1.3 Calibration curve of BTB dye 2.1.2.2.3 Determination of Phase volume Ratio, Fractional coacervate phase volume and pre-concentration factor The volumes of the respective surfactant-rich and aqueous phases obtained after the separation of phases were determined using calibrated centrifuge tubes for calculating the pre concentration factor. Surfactant solutions containing typical amounts of the BTB were extracted using the CPE procedure, followed by the measurement of the respective phase volumes. The results reported are the average of three determinations. The phase volume ratio is defined as the ratio of the volume of the surfactant-rich phase to that of the aqueous phase. It is calculated using the following formula. (2.1.1) Where RV is the phase volume ratio, VS and VW are volumes of surfactant-rich phase and aqueous phase respectively. The pre-concentration factor, (fC) is defined as the ratio of the volume of bulk solution before phase separation (Vt) to that of the surfactant-rich phase after phase separation (Vs). (2.1.2) Where Vt and VS are the volumes of the bulk solution before phase separation and the surfactant-rich phase respectively. The fractional coacervate phase volume with the feed surfactant concentration is calculated by using the relationship: (2.1.3) Where FC is the fractional coacervate volume and Cs is the molar concentration of the feed surfactant solution, for fixed feed dye concentration, the parameters a and b vary linearly with temperature. The value of Fc lies in between 0.04-0.23 for various operating conditions. Surfactant partition coefficient (m) is defined as the ratio of concentration of surfactant in coacervate and dilute phase. - (2.1.4) The efficiency of extraction is defined as - (2.1.5) 2.1.4 Discussion: This section is divided into four parts. In first part, factors influencing the extraction efficiency (e.g., concentrations of non-ionic surfactants, dye and salt, temperature and pH of the solution), fractional coacervate phase volume have been discussed. The nature of solubilization isotherm at different temperature has been presented in the second part. In the third and fourth parts, thermodynamic parameters and a calculation procedure for the determination of surfactant requirement for the dye removal to a desired level is briefly discussed. 2.1.4.1 Factors influencing efficiency: For ionizable solutes, the charge of the solute can greatly influence its extent of binding to a micellar assembly [34]. The ionic form of a molecule normally does not interact with and bind the micellar aggregate as strongly as does its neutral form. Thus adjustment of the solution pH for maximum extractability is of special importance when controlling experimental variables in CPE. With increasing pH, the efficiency of extraction increases up to pH 8.0 and then decreases. This is in accordance with the decrease in cloud point till pH 8.0 and a sudden increase at pH 9.2. Further, the pK value of BTB is 7.1. In the absence of any buffer solution, pH of the dye solution is 7.0 and there is no change in pH event after the extraction process is completed. Hence, all the parameters were optimized at this fixed pH of the medium. No significant increase in efficiency is observed with increasing [Dye] since the cloud point is not altered much with increasing the concentration of dye. The extraction efficiency of dye increases with the increase of surfactant concentration. The concentration of the micelle increases with the surfactant concentration, resulting in more solubilisation of dye in micelles. The surfactant concentration in the dilute phase remains constant (and equal to around CMC); the surfactant concentration along with the solubilised dye in the coacervate phase (micellar phase) increases to maintain the material balance[42-46]. The extraction of dye with TX-100 solution is due to hydrophobic interaction between BTB and hydrophobic micelles in the solution. However, with the increase of TX-100 concentration, the analytical signal becomes weak due to the increase in the final volume of the surfactant rich phase that causes pre concentration factor (phase volume ratio) to decrease [35]. In view of these observations, a 0.04 mol/dm3 triton X- 100 is used throughout. It has been shown that the presence of electrolyte can change the CP in different ways[36]. Salting out electrolyte such as NaCl, decreases the cloud point temperature. They can promote the dehydration of ethoxy groups on the outer surface of the micelles, enhancing the miceller concentration leading to solubilisation of more dye and resulting in a more efficient extraction [37] and reduce the time required for phase separation. A lower salt concentration gives a smaller pre concentration factor, due to the larger volume in the surfactant-rich phase at lower salt concentrations [38]. As shown in the fig the ability of salts to enhance extraction efficiency of the dye was in the order of Na2SO4>NaCl. Temperature has pronounced effect on the extraction of solute. (i) At high temperature, CMC of non-ionic surfactant decreases. (ii) the non-ionic surfactant becomes more hydrophobic due to dehydration of ether oxygen [39] and increase in micellar concentration and solubilization. A general preconcentration factor of 20-60 was obtained with this CPE method and similar pre concentration has been reported for other analytes (40). Typical preconcentration factors reported in the literature[41] varà ¯ed fiom 10 to 100. The CPE method gives a better preconcentration factor compared to conventional solvent extraction methods. In general, high pre concentration factors in CPE can be achieved using small amounts of surfactants which have large capacity to accommodate dye molecules. The hydrated nature and relative polarity of micelles, on the other hand, limit the extraction of dye into the surfactant-rich phase. From the viewpoint of concentrating the analytes present in aqueous solutions, the larger pre concentration factor, e.g., the smaller phase volume in the surfactant-rich phase is desired. A lower surfactant concentration gives a higher pre concentration factor. However, it becomes very difficult for sampling and accurate analysis with a very small volume of the surfactant-rich phase. On the contrary, excessive amount of added salt of ââ¬Å"salting-outâ⬠effect can give the higher pre concentration factor, but it is likely forming the very viscous liquid crystalline phase, instead of the fluidic Liquid phase, in the system, making it difficult to separate the surfactant-rich phase. Therefore, optimization of the pre concentration factor is very critical in a feasible CPE technique. Hence, surfactant concentration of 0.04 mol/dm3 was chosen to conduct CPE experiments in this research. 2.1.4.2 Solubilization isotherm: The adsorption isotherm relating moles of solute solubilized per mole of surfactant[50] are presented in Figure2.1.8. The isotherm can be expressed according to Langmuir type expression: (2.1.6) Where, both m and n are functions of temperature. Figure 2.1.8 Solubilisation curve of BTB dye Assuming a homogeneous monolayer adsorption, the linearized Langmuir sorption model of equation (2.1.6) can be written as: (2.1.7) Plot of 1/qe vs. 1/Ce over the entire dye concentrations was linear with a correlation coefficient of 0.983 as shown in Figure 2.1.9. Thus, the solubilization of dye obeys the Langmuir adsorption model. The calculated values of Langmuir parameters m and n from the slope and intercept of the linear plot of 1/qe vs. 1/Ce were found equal to 4.29X 10-3 (mol/mol) and 2.04X104 dm3 /mol, respectively. Figure 2.1.9 Langmuir isotherm of BTB dye 2.1.4.3 Thermodynamic parameters: The overall thermodynamic parameters ÃâG0, ÃâS0 and ÃâH0 were calculated using equations (2.1.8, 2.1.9) [48,49]as follows. (2.1.8) - (2.1.9) Where T is the temperature in (K), qe/Ce is called the solubilization affinity. ÃâS0 and ÃâH0 are obtained from a linear plot of log (qe/Ce) versus (1/T), from Eq. (2.1.8) and. Once these two parameters are obtained, ÃâG0 is determined from Eq. (2.1.9) and presented in Table 2.1.6. Plot of log (qe/Ce) versus (1/T) is shown in Figure 2.1.10. Table 2.1.6 : Thermodynamic parameters Temp = 80à ±0.1Ãâ¹Ã
¡c; [BTB]initial =12.8010-5 mol/dm3 ; [TX-100] =4.010-2 mol/dm3 pH ( à ±0.05) -à ¢Ãâ â⬠G ( KJ/mole ) à ¢Ãâ â⬠S ( KJ/mole/K ) à ¢Ãâ â⬠H ( KJ/mole ) 353 343 333 6.0 19.57 16.93 14.28 0.27 73.92 7.0 22.11 18.75 15.38 0.34 96.76 8.0 21.10 18.63 16.16 0.25 66.06 Figure 2.1.10 log (qe/Ce) versus (1/T) 2.1.4.4 Design of experiment: The amount of surfactant required can be evaluated from the residual dye present in the dilute phase of the solution after conducting cloud point extraction can be determined [45]. qe is the mole of dye solubilized per mole of non-ionic surfactant. (2.1.10) Moles of dye solubilized can be obtained from mass balance equation, (2.1.11) (2.1.12) Where, A is the moles of dye solubilized in the micelles, V0 and Vd are the volume of the feed solution and that of the dilute phase after CPE, C0 and Ce are concentration of the BTB dye after CPE respectively; Cs is the concentration of surfactant in feed. From the equation 2.1.10, 2.1.11 and 2.1.12 we can write, (2.1.13) Moles of dye solubilized can be obtained from mass balance equation, Where, qe is the mole of dye solubilized per mole of non-ionic surfactant, x is moles TX-100 used, A is the moles of dye solubilized in the micelles, V0 and Vd are the volume of the feed solution and that of the dilute phase after CPE, C0 and respectively; Cs is the concentration of surfactant in feed. (2.1.14) Now, by involving the definition of fractional coavervate volume in the above equation we get, (2.1.15) - (2.1.16) Where a,b are the parameters a and b which are functions of temperature. Substituting the above equation in equation (8) we get, - (2.1.17) Substituting the above equation in equation (1) and rearranging we get, (2.1.18) From the above equation the desired surfactant required (Cs) can be obtained knowing the value of m and n the Langmuir constants, a and b the operating temperature constants, Ce the amount of dye in dilute phase after cloud point extraction. By using the above equation experiments which are conducted were compared for surfactant used and required are shown in Table 2.1.8. Table 2.1.8: Comparison data of required and used TX-100 at 80Ãâ¹Ã
¡C 105 [BTB]initial mol/dm3 105[ BTB]dilute mol/dm3 102[ TX-100 ]used mol/dm3 102[ TX-100 ]Required mol/dm3 3.20 1.11 4.00 2.64 6.40 1.87 4.00 3.82 8.00 2.22 4.00 4.32 9.60 3.19 4.00 3.79 12.80 4.09 4.00 4.46 16.00 6.72 4.00 3.74 8.00 3.60 3.00 2.42 8.00 1.73 4.50 4.32 8.00 1.18 5.00 5.60
Wednesday, October 2, 2019
The Character of Meursault in The Stranger (The Outsider) :: Camus Stranger Essays
The Character of Meursault in The Stranger Albert Camus wrote The Stranger during the Existentialist movement, which explains why the main character in the novel, Meursault, is characterized as detached and emotionless, two of the aspects of existentialism. In Meursault, Camus creates a character he intends his readers to relate to, because he creates characters placed in realistic situations. He wants the reader to form a changing, ambiguous opinion of Meursault. From what Meursault narrates to the reader in the novel, the reader can understand why he attempts to find order and understanding in a confused and mystifying world. Camus writes in a simple, direct, and uncomplicated style. The choice of language serves well to convey the thoughts of Meursault. The story is told in the first person and traces the development of the narrator's attitude toward himself and the rest of the world. Through this sort of simple grammatical structure, Camus gives the reader the opportunity to become part of the awareness of Meursault. In Part I, what Meursault decides to mention are just concrete facts. He describes objects and people, but makes no attempt to analyze them. Since he makes no effort to analyze things around him, that job is given to the reader. The reader therefore creates his own meaning for Meursault's actions. When he is forced to confront his past and reflect on his experiences, he attempts to understand the reasons for existence. At first, Meursault makes references to his inability to understand what's happening around him, but often what he tells us seems the result of his own indifferen ce or detachment. He is frequently inattentive to his surroundings. His mind wanders in the middle of conversations. Rarely does he make judgments or express opinions about what he or other characters are doing. Meursault walks through life largely unaware of the effect of his actions on others. Meursault is distant from set plans, ambitions, desires, love, and emotions in general. He has a difficult time with emotions such as regret and compassion. The reader sees the nature of his personality in the first few lines of the novel: "Maman died today. Or yesterday maybe, I don't know." When he hears of the death of his mother through a telegram, he is unattached, and can be considered uncaring.
Tuesday, October 1, 2019
Lauraââ¬â¢s Struggle for Growth in The Garden Party Essay -- Garden Party
Lauraââ¬â¢s Struggle for Growth in The Garden Partyà à à à à à Through her short story "The Garden Party," Katherine Mansfield portrays a young womanââ¬â¢s struggle through adolescence and her tumultuous entrance into adulthood. Mansfield paints a tale of grievance, bewilderment, enlightenment, and maturation furthered by the complications of class distinctions. Mansfieldââ¬â¢s protagonist, Laura, encounters considerable hardship in growing up and must denounce all of the puerile convictions in her chimerical world in order to attain maturity in the real adult world. As does any normal teenager, Laura Sheridan struggles to make sense of her adolescent life. As Don Klein remarks, "The storyââ¬â¢s focusââ¬âand central dramatic impulseââ¬âis the young girlââ¬â¢s secret struggle to grow up" (124). Grappling with excessive inner turmoil, she attempts to erect a unique identity for herself, one set apart from those of her family members. In order to effect such radical transformation, she is first compelled to overcome several major impediments in her life, the most encumbering being her mother. The overbearing presence of Lauraââ¬â¢s mother and her motherââ¬â¢s ideals pose an impending hindrance in Lauraââ¬â¢s progression to adulthood. As Laura battles with maturity, she begins shedding the skin of her childhood and hence begins transcending the mold created for her by her motherââ¬â¢s upbringing. Laura also begins to denounce the snug, evasive dream world that her mother has suffocated her in. Mrs. Sheridan intentionally raises her children in this dream world in order that she have complete control over their thoughts and actions without their knowledge. She furthers this dream world by letting them believe that they, and not she, are actually in control. For in... ... the daily life struggles of an average teenager, but also, on a more personal level, she gives insight into her own adolescent hardships as well. Works Cited Davis, Robert Murray. "The Unity of ââ¬ËThe Garden Party.ââ¬â¢ "Short Story Criticism 23 (1993): 128-30. Klein, Don W. "ââ¬â¢The Garden Partyââ¬â¢: A Portrait of the Artist." Short Story Criticism 23.(1993): 123-8. Mansfield, Katherine. "The Garden Party." The Norton Anthology of English Literature. 6th ed. Ed. M. H. Abrams. New York: Norton, 1996. 2510-20. Taylor, Donald S. "Crashing the Garden Party: A Dream-A Wakening." Short Story Criticism 23 (1993): 121-2. Walker, Warren S. "The Unresolved Conflict in ââ¬ËThe Garden Party.ââ¬â¢" Short Story Criticism 23 (1993): 119-21. Weiss, Daniel A. "Crashing the Garden Party: The Garden Party of Proserpina." Short Story Criticism 23 (1993): 122-1. à Ã
Personal Growth and Development
Psychology 101 TuThu 3:30-4:45 The concept of personal development has been an important factor that shapes the characters we develop, and the overall person we become. Research suggests that many of the values and traits we possess stem from both genetics and the environment. In terms of genetics, hereditary traits are passed down from the mother and father, which play a huge role in personal development, but research and personal experience also suggest that the impact of the environment parallels the importance of genetics.Environmental factors have been proven to significantly impact the growth and development of an individual. The home the individual is raised in, the people they are surrounded by and the individualââ¬â¢s role model all play an important role in the molding of the individual. Such is the reason why cultural relativism impacts individuals, and guides the way they perform tasks, execute decisions, and their way of thought. The American culture, for example, has slowed down the transition of adolescence into adulthood due to cultural ideals, and the greater need to pursue a higher education in order to compete successfully in the country.Research by the 1958 National Child Development Study, and the 1970 British Cohort Study support these statements, and have shown that we have reached a generation in which adolescents are transitioning into adulthood more slowly, yet more psychological stress is placed on them, and reports of depression have raised since the 50s. Personal growth and development traces back to genetics. Each individual is born with a specific set of genes depending on the mother and father.Genetic traits such as weight, height, appearance, and in some cases, personality, are passed down the hereditary line, and predisposes individuals to certain traits and qualities. The health of the individual is also largely influenced by the care taken by the mother while the fetus was developing within the womb. Proper nutrition, and avoiding neglectful habits such as drinking and smoking, all help to shape the health of the individual from the time they are born. The environment we are raised in is also another factor in the shape and development of an individual.Take for instance the study that examined how environment affects individuals such as siblings, twins, and kids not related by blood, but raised in the same environment. It is shown that even twins who exited the womb during the same birth can come out profoundly different in their adulthood if they were raised in a different environment from their twin. The food that we eat, the habits that we employ, and the overall lifestyle of the individual play an important role as well as genetics.Two similar children who are raised in different environments may possess the same genetic traits, but overall can be distinguished by the environment they were raised in. Cultural relativism plays a role as well in the well-being of the individual. Being raised in Ame rica sets a different standard for living vs. being born elsewhere. In America, individuals are taught to be creative and unique, rather than conform to group ideals. It is in this culture that children are taught to employ creative ideas, and to break away from the grain.In other cultures, such as those in China, kids are raised to follow the grain, and rather than question elders and peers, are taught to accept what is given and told to them. With that in mind, the transition into adulthood has also slowed down due to various factors such as cultural acceptance, and the need to pursue a higher education in order to be more competitive in the job market. As the years pass, so does the standard of education raise as more occupations open up to individuals with special skills and knowledge achieved through a higher education in college.Although this slower transition into adulthood and independence may seem less stressful for individuals, studies from the British Cohort Study show th at individuals in the 70s vs. the 50s reported more cases of depression, and stress due to factors such as economic recessions which hindered the job market availability. This generation is especially pressed to reach higher educational goals as the market for unskilled labor reduces as the market for skilled labor increases hindering the transition into adulthood and independence.In conclusion, personal development and growth are influenced by several factors such as genetics, environment, cultural relativism. These factors shape an individual in specific ways. Genetics passed on influence oneââ¬â¢s height, personality, and predispositional thinking that affect the person in everyday situations. Proper health from the time the embryo is implanted is necessary for a healthy baby. The environment also plays a role in the shaping of the individual. The home one was raised in, the nutrition, and overall lifestyle impact the health and behavior of a person.Cultural relativism also pl ays a role, as culture follows an individual around regardless of location, and influences what one finds acceptable, and follows due to social norms. Because of the need for a higher education in todayââ¬â¢s job market, a slower transition into adulthood can be traced to the need for more schooling, and a slower transition to independence.References Spiro, Melford E. (2001). Cultural determinism, cultural relativism, and the comparative study of psychopathology. Ethos. Berkeley:. Vol. 29, Iss. 2; pg. 218, 17 pgs. Huffman, Karen (2010). Life Span Development I. John Wiley and Sons, Psychology in Action 314-347. Personal Growth and Development Personal Development and Growth Zoheb Osmani Psychology 101 TuThu 3:30-4:45 The concept of personal development has been an important factor that shapes the characters we develop, and the overall person we become. Research suggests that many of the values and traits we possess stem from both genetics and the environment. In terms of genetics, hereditary traits are passed down from the mother and father, which play a huge role in personal development, but research and personal experience also suggest that the impact of the environment parallels the importance of genetics.Environmental factors have been proven to significantly impact the growth and development of an individual. The home the individual is raised in, the people they are surrounded by and the individualââ¬â¢s role model all play an important role in the molding of the individual. Such is the reason why cultural relativism impacts individuals, and guides the way they perform tasks, execute decisions, and their way of th ought. The American culture, for example, has slowed down the transition of adolescence into adulthood due to cultural ideals, and the greater need to pursue a higher education in order to compete successfully in the country.Research by the 1958 National Child Development Study, and the 1970 British Cohort Study support these statements, and have shown that we have reached a generation in which adolescents are transitioning into adulthood more slowly, yet more psychological stress is placed on them, and reports of depression have raised since the 50s. Personal growth and development traces back to genetics. Each individual is born with a specific set of genes depending on the mother and father.Genetic traits such as weight, height, appearance, and in some cases, personality, are passed down the hereditary line, and predisposes individuals to certain traits and qualities. The health of the individual is also largely influenced by the care taken by the mother while the fetus was devel oping within the womb. Proper nutrition, and avoiding neglectful habits such as drinking and smoking, all help to shape the health of the individual from the time they are born. The environment we are raised in is also another factor in the shape and development of an individual.Take for instance the study that examined how environment affects individuals such as siblings, twins, and kids not related by blood, but raised in the same environment. It is shown that even twins who exited the womb during the same birth can come out profoundly different in their adulthood if they were raised in a different environment from their twin. The food that we eat, the habits that we employ, and the overall lifestyle of the individual play an important role as well as genetics.Two similar children who are raised in different environments may possess the same genetic traits, but overall can be distinguished by the environment they were raised in. Cultural relativism plays a role as well in the well -being of the individual. Being raised in America sets a different standard for living vs. being born elsewhere. In America, individuals are taught to be creative and unique, rather than conform to group ideals. It is in this culture that children are taught to employ creative ideas, and to break away from the grain.In other cultures, such as those in China, kids are raised to follow the grain, and rather than question elders and peers, are taught to accept what is given and told to them. With that in mind, the transition into adulthood has also slowed down due to various factors such as cultural acceptance, and the need to pursue a higher education in order to be more competitive in the job market. As the years pass, so does the standard of education raise as more occupations open up to individuals with special skills and knowledge achieved through a higher education in college.Although this slower transition into adulthood and independence may seem less stressful for individuals, studies from the British Cohort Study show that individuals in the 70s vs. the 50s reported more cases of depression, and stress due to factors such as economic recessions which hindered the job market availability. This generation is especially pressed to reach higher educational goals as the market for unskilled labor reduces as the market for skilled labor increases hindering the transition into adulthood and independence.In conclusion, personal development and growth are influenced by several factors such as genetics, environment, cultural relativism. These factors shape an individual in specific ways. Genetics passed on influence oneââ¬â¢s height, personality, and predispositional thinking that affect the person in everyday situations. Proper health from the time the embryo is implanted is necessary for a healthy baby. The environment also plays a role in the shaping of the individual. The home one was raised in, the nutrition, and overall lifestyle impact the health and beh avior of a person.Cultural relativism also plays a role, as culture follows an individual around regardless of location, and influences what one finds acceptable, and follows due to social norms. Because of the need for a higher education in todayââ¬â¢s job market, a slower transition into adulthood can be traced to the need for more schooling, and a slower transition to independence.References Spiro, Melford E. (2001). Cultural determinism, cultural relativism, and the comparative study of psychopathology. Ethos. Berkeley:. Vol. 29, Iss. 2; pg. 218, 17 pgs. Huffman, Karen (2010). Life Span Development I. John Wiley and Sons, Psychology in Action 314-347.
Subscribe to:
Posts (Atom)